Specifications

• Size: 1/2”- – 48” (DN15-DN1200)
• Rating: DIN - PN6/PN10/PN16/PN40 / ANSI - 125LB/150LB/600LB/900LB / JIS – 5K/10K/16K/20K
• End Connection: Threaded End NPT/BSPT / SW / BW / Flange RF; WNRF; SORF
• Body: Cast Iron / Ductile Iron / Cast Steel / Stainless Steel / Bronze / Nickel Al-Bronze / Duplex Stainless Steel / Alloy Steel
• Fabricate Body: Mild Steel (A36, SS400)
• Filter / Basket: SS316 / SS316L / Copper Nickle / Monel / Titanium

Y- Strainer

Our Y Strainers are used in pressurized lines (gas or liquid) and can also be used in suction or vacuum conditions. It is a cost-effective solution to mechanically remove unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. Three types of body material processing are available: forging type, casting type and fabricating type; depending on size and specific requirements. They are intended for applications where small amounts of solid particulate are expected, and where clean-out will be infrequent. Our Y Strainer can be installed horizontal with strainer side facing down for easy drainage and can also be installed in vertical piping with flow going downwards.

---